Flow-Diverter

Silk+

Haemodynamically effective implant for the endovascular treatment of intracranial aneurysms.

Properties
  • "Braided-wire" technology optimizes the hemodynamic effect
  • "Sliding-cell" technology ensures optimal wall apposition and occlusion at the aneurysm neck
  • Radiopaque over the entire length and diameter due to helical markers
  • Recapturable to up to 90 % of total length deployment

 

Website

www.balt-corp.com

Downloads
Specifications
Reference Vessel
∅ (mm)
Silk+ length nominal
∅ (mm)
Unconstrained stent
∅ (mm)
Unconstrained
stent length
(mm)
Delivery
catheter
SILK5,0x25 4,50 bis 5,25 25 5,5 11 Vasco+25
SILK5,0x30 30 13 Vasco+25
SILK5,0x40 40 17 Vasco+25
SILK5,5x25 5,00 bis 5,75 25 6,0 11 Vasco+25
SILK5,5x30 30 13 Vasco+25
SILK5,5x40 40 17 Vasco+25
Relevant products

No products have been found.

Related products

Contour

Flow-Diverter

Specifically designed as an intra-aneurysmal nitinol implant for the treatment of intracranial aneurysms.

eCLIPs

Bifurcation system

Coil-assisted, non-circumferential flow-diverter for bifurcation aneurysms.

Neqstent

Flow-Diverter

Intraaneurysmal, haemodynamically effective implant for coil-assisted treatment of intracranial aneurysms.

Silk Vista Baby

Flow-Diverter

Haemodynamically effective implant for the endovascular treatment of intracranial aneurysms and brain-supplying cervical vessels.

Silk Vista

Flow-Diverter

Haemodynamically effective implant for the endovascular treatment of intracranial aneurysms and brain-supplying cervical vessels.
Videos
Legal information

silk+ the original flow diverterThe self-expandable SILK+ stents are designed for the treatment of intracranial aneurysms and should be used only by clinicians trained in the placement of intracranial stents. Class III CE0297 in compliance with Medical Device Directive (MDD 93/42/EEC amended by 2007/47/EC). Manufactured by BALT Extrusion SAS. Carefully read the instructions for use before use. First CE marking:2012. VASCO+ is a reinforced micro-catheter intended for injection of diagnostic or therapeutic product, to position pushable coils “SPIRALES” or detachable coils especially the ones of MDS « mechanical detachment system », for the use of the self-expanding stent LEO+ or SILK+. Class III CE0297 in compliance with Medical Device Directive (MDD 93/42/EEC amended by 2007/47/EC). Manufactured by BALT Extrusion SAS. Carefully read the instructions for use before use. First CE marking: 2004. The content of this document, in particular data, information, trademarks and logos is BALT SAS and affiliates’ sole property. © 2019 BALT SAS and affiliates, all rights reserved. All representation and/or reproduction, whether in part or in full, is forbidden and would be considered a violation of BALT SAS and affiliates’ copyrights and other intellectual proprietary rights. This document with associated pictures is non-contractual and is solely dedicated to healthcare professionals and BALT’s distributors (BALT’s supplier’s distributors). It cannot be distributed or given to patients. The products commercialized by BALT shall exclusively be used in accordance with the instructions for use included in the boxes.

Inquiry
Privacy Policy*
Please calculate 1 plus 1.